|
Corvette Parts from Custom Corvette Accessories
|
Billet Aluminum CG Racing Pedal Installation Page
|
Tools Required
Drill
1/16 Drill Bit
Phillips Head Screwdriver
Adjustable Wrench
Brake/Clutch Install
1) Place Clutch/Brake Pedal over existing OEM Pedal
2) Align so the center holes of the CG pedals, line up with the holes in the OEM pedals
|
3) Place supplied brackets behind the OEM pedal (Vertically)
4) Insert Screw through CG Pedal/OEM Pedal/Bracket and fasten with supplied lock nut
5) Adjust pedal to desired position and tighten
|
Dead Pedal/Gas Pedal Install #1
1) Align gas pedal and dead pedal.
2) Drill 4 pilot holes
3) Fasten gas pedal/dead pedal with supplied screws
|
Gas Pedal and Dead Pedal Install #2
1) Align gas pedal and dead pedal.
2) Drill 2 holes all the way through the Gas Pedal
3) Bolt Gas pedal to the OEM pedal using the 2 long bolts (extra supplied)
4) Drill two pilot holes and screw the remaining two screws into the gas pedal.
5) Fasten the dead pedal with supplied screws
|
 |
| Bolt Gas Pedal Installation |
|
|
Disclaimer
These instructions are provided for information purposes only. Do not attempt installation of any CCA part if you are not a qualified mechanic.
For proper jacking instructions for your Corvette, please consult your owners manual.
Custom Corvette Accessories accepts no responsibility of damage to your vehicle during installation of our parts and accessories.
Custom Corvette Accessories accepts no responsibility for damage to your vehicle while using our installed parts during operation of your vehicle.
Custom Corvette Accessories suggests that you contract a qualified mechanic for installation of all parts and accessories.
|
|
